Differences

This shows you the differences between two versions of the page.

--- en-us:10.0:project_settings_1:slide_settings [2019/10/25 21:53] – [Main Tab] davegee
+++ en-us:10.0:project_settings_1:slide_settings [2022/12/19 11:48] (current) – external edit 127.0.0.1
@@ Line 31: / Line 31: @@
 Also it should be noted that setting background parameters is only relevant if the Main Image does not fill the projected screen space.
-==== Audio Comment ====
+** Audio Comment **
 The next section "Audio comment", allows a previously recorded audio file to be selected and added to a slide or a comment recorded and added. Again this mirrors the globally applicable option in "Project Options/Audio" tab.
-==== Advanced Options ====
+** Advanced Options **
 The final section is "Advanced options":
@@ Line 51: / Line 51: @@
 ==== Preset Transitions ====
-The "Transitions" tab provides transition options for slide(s).  The options provided are very similar to those available on a global basis in [[en-us:10.0:project-options:transitions-tab|"Project Options / Transitions".]], the main difference is that here the transition applied as a default in "Project Options" is replaced with a specific transition for the slide or slides selected.  The "Slide Options/Transition" tab is shown below.
+  * The "Transitions" tab provides transition options for slide(s).
+  * The options provided are very similar to those available on a global basis in Project Options / Transitions
+  * the main difference is that here the transition applied as a default in "Project Options" is replaced with a specific transition for the slide or slides selected.
+  * The "Slide Options/Transition" tab is shown below.
-{{en-us:10.0:slide_options:v9-slide-ops002.jpg}}
+{{:en-us:10.0:project_settings_1:slide-options-02-trans.jpg|}}
-At the top of the tab page, the initial setting of "Transition from Project options" is set to the "Default transition".  Thus the selected slide(s) will have transition parameters set as in "Project Options". If "Default transition with own duration" is selected, the type of transition will remain unchanged but its duration can be altered. Clicking on one of the standard transitions will apply this to the selected slide(s) and the transition parameters can be altered as required. In this respect the operations of transitions is the same as the "Transitions Tab" in "Project Options".
+  * At the top of the tab page, the initial setting of "Transition from Project options" is set to the "Default transition".
+  * Thus the selected slide(s) will have transition parameters set as in "Project Options".
+  * If "Default transition with own duration" is selected, the type of transition will remain unchanged but its duration can be altered.
+  * Clicking on one of the standard transitions will apply this to the selected slide(s) and the transition parameters can be altered as required.
+  * In this respect the operations of transitions is the same as the "Transitions Tab" in "Project Options".
 ======   ======
@@ Line 61: / Line 68: @@
 ====== Custom Transitions ======
-See Article here:
+See Article here: https://docs.pteavstudio.com/en-us/10.0/how_to_v10/customtransitions
-[[http://docs.picturestoexe.com/en-us/9.0/v9howto/customtransitions|http://docs.picturestoexe.com/en-us/9.0/v9howto/customtransitions]]